Integrirano pojačalo
No.383 isporučuje 100 W snage pri opterečenju od 8 ohma, odnosno 200 W na 4 ohma. Dvostruka mono konfiguracija sa dva toroidalna transformatora osigurava potpunu odijeljenu elektroniku lijevoga i desnoga kanala, a tri nezavisna napajačka stupnja pružaju stabilno napajanje svim krugovima. Predpojačivačka sekcija nudi mogućnost podešavanja razine ulaznog signala (gain) različitih izvora što olakšava uparivanje sa zvučnicima različitih osjetljivosti. Izlazni solid-state stupanj koristi iste elemente kao i referentni mono-blokovi No.33H. Kompletno pojačalo je izgrađeno bez kompromisa bilo koje vrste, pa je i zbog toga No.383 jedini integrirac u ponudi Mark Levinson.
Specification:
Dimensions: 17.5"w × 19.5"d (including rear handles) × 6.55"h
Frequency Response: Within 0.1dB from 20 Hz to 20kHz
Input Connectors: Two pairs balanced XLR , three pairs single-ended on Madrigal RCA
Input Impedence: 100 kohms
Input Overload: 2V on XLR, 1V on RCA (Gain +18dB)
Mains Frequency: 50 or 60Hz (set at factory)
Mains Voltage: 100V, 120V, 220V, 230V, or 240VAC (set at factory)
Output Connectors: One pair Madrigal-designed speaker binding posts, one pair record outputs on Madrigal RCA.jpg)
.jpg)
Output Impedence: Less than 0.05, 20-20,000Hz
Power Consumption: 100W in standby
Power Output: 100 watts per channel at 8 ohms
Total Harmonic Distortion: Less than 0.3%
Voltage Gain: 6, 12, or 18dB in the line stage
Volume Control Gain: 72.2dB
Volume Control Gain Resolution: 0.1dB steps above the 38.5 in display (-34.7 dB) with slowly increasing step size at progressivel lower levels
Weight: 80 lbs. (36.6 kg)
